Follow us :

Building the Foam Machine

time2011/06/10

  If you consider throwing a house party, a welcome and unique addition may be a foam machine. These machines are often found in nightclubs and the production of soap bubbles and large bubbles. Building a device to achieve at home, it is possible, as long as you or your guests do not mind the small soap and water for the foam to melt.
Once you get the necessary parts, assembly, and foam machines running quite simple. You will want to consider in setting the local area, you will have the final would be more party-inch thick foam, you should not run in a room, you are not completely covered in soap bubble foam machine fine. As additional protection it is best to put some plastic cover, such as the tarp on the floor so that if the bubble has begun to melt, it has not become too immersed in everyone's feet wet. Once you have properly protected and safe area, you can create the machine.

  Placed in the trash right inside the inflatable swimming pool, preferably somewhere near the center of the room, so that the bubble distribution. However, if you need to move the swimming pool and trash in order to reach other parts of the hose, you can do so later. Run hot water from a garden hose to the trash. It hung on the edge, you can simply shake the inside, it does not need to reach all the way to the bottom. Vacuum hose to do the same, trying to directly inside the garden hose next to it. If you do have some heavy duty tape, hose tape can work together to make easier. With the hose firmly in the trash, put hot water in the open run, then set to "fight" or "reverse" and the vacuum to it as well. You will need to adjust the water flow so that it more or less match the intensity and the vacuum hose to the air. If done successfully the water will be blown up around the trash as soon as possible both in and out around the hose.

  At this point, you can empty the trash one to a large number of liquid detergent. Free money injected into the trash, where the vacuum force the water around the center of the rapid blow. This will immediately generate a lot of foam will overflow out of the trash and eventually began to fill the room. If the bubble stops growing at a decent simply add more soap, repeated every time the bubble need to "refuel." The intensity of the bubble will really spread by hand or shovel room, and if it does not immediately reach all areas. Sometimes, a little inflatable pool filled with water may not enter the bubble out. If this occurs, you can choose to bail out of a bowl or bucket with a pool, but plenty of water should not normally accumulate, if the bin is large enough.